Description

When you’re dealing with chain-driven equipment on your farm, a worn or damaged sprocket can bring your whole operation to a halt. Whether it’s on a planter drive, conveyor system, or other implement with #35 chain drives, this 30-tooth sprocket keeps your equipment running when there’s work to get done.

What You’re Getting

30 teeth designed specifically for #35 chain pitch and profile
Weasler quality construction that handles the constant loading cycles of farm work
Precision tooth geometry that reduces chain wear and power loss
Welded hub design that won’t separate under field conditions

Built for Real Farm Work

This sprocket fits right into chain drive systems you’ll find on planters, cultivators, grain handling equipment, and other implements where reliable power transmission is critical. The 30-tooth configuration provides a good balance of speed and torque for most agricultural applications, whether you’re running seed meters, conveyor drives, or implement sections.

Made to Last

Farm equipment takes a beating, and chain drives are no exception. This sprocket is built to handle the dust, moisture, and constant cycling that’s part of everyday farm life. The welded construction means the teeth and hub are permanently bonded, so you won’t have issues with loose teeth or hub failure under load.

Good to Know

Make sure to check your chain tension and alignment when installing a new sprocket – improper setup causes premature wear on both chain and sprocket. A little grease on the hub keyway during installation makes the job easier and prevents corrosion. If you’re replacing one sprocket, it’s usually smart to check the others in the same drive system.