Description

When you’re plumbing your sprayer tank, irrigation setup, or chemical applicator, getting the right connections is half the battle. Sometimes you need to step down from a bigger line to a smaller one, and that’s where this handy reducer bushing comes in. It lets you go from a 2-inch male pipe thread down to 3/4-inch female threads without a bunch of extra fittings cluttering up your setup.

What You’re Getting

Steps down from 2-inch MNPT to 3/4-inch FNPT in one clean connection
Made from durable polypropylene that won’t rust, corrode, or react with chemicals
Threads cut to standard NPT specs for a tight, leak-free seal
Lightweight poly construction that’s easy to handle and won’t crack in cold weather
Compact design saves space and reduces potential leak points

Built for Real Farm Work

This bushing is right at home in any agricultural fluid handling system. Whether you’re setting up a new sprayer, retrofitting an older tank, or building a custom mixing station, it handles the step-down from larger supply lines to smaller application lines. Works great with liquid fertilizers, herbicides, water systems, and other farm chemicals that poly fittings are designed for.

Made to Last

Banjo knows farm equipment takes a beating, so this bushing is built from chemical-resistant polypropylene that stands up to UV exposure and temperature swings. The threads stay sharp and seal properly season after season, even when you’re dealing with aggressive chemicals or pressure washing equipment.

Installation Notes

Thread it in hand-tight plus about a turn with a wrench—don’t over-tighten poly fittings or you’ll crack them. Use pipe thread sealant or tape on the male threads for the best seal. If you’re working with chemicals, double-check that your thread sealant is compatible with what you’re running through the system.