Description

When your MF65 starts putting out more noise than power, and you’re catching whiffs of diesel exhaust where you shouldn’t, it’s usually that horizontal exhaust pipe telling you it’s had enough. This critical connection between your manifold and muffler takes a beating from constant heat cycling and weather exposure, and when it fails, you’ll know it—both from the extra noise and the fumes that find their way into the cab.

What You’re Getting

Heavy-duty 46-inch steel construction that handles the heat and vibration these Perkins diesels dish out
Three-bolt flange connection that distributes clamping force evenly and stays tight
1-3/4 inch diameter outlet sized specifically for proper exhaust flow and back pressure
Direct replacement for worn or rusted original pipes—no modifications needed

Built for Real Farm Work

Your MF65 with its reliable Perkins diesel was built when tractors were designed to run all day, every day. Whether you’re cultivating, mowing, or running a loader around the farmstead, this workhorse needs an exhaust system that can keep up. The horizontal design directs exhaust gases away from the operator area, which matters when you’re spending long hours on the seat.

Made to Last

Farm exhaust pipes live a hard life—road spray from below, weather from above, and constant temperature swings from cold starts to full operating heat. This replacement pipe uses heavier steel construction than many aftermarket alternatives, giving you the durability you need without the premium price of OEM parts.

Installation Notes

This pipe connects with a standard three-bolt pattern that should match your manifold outlet perfectly. Before installation, clean all the old gasket material off the mounting surfaces and check for any cracks around the bolt holes—decades of heat cycling can weaken these areas. Use anti-seize compound on the bolts for easier service down the road.