Description

When your tractor’s front axle gets sloppy or binds up during steering, the problem often comes down to worn pivot points that need precise adjustment. This 0.10mm shim is what Carraro uses in their front axle designs to dial in the exact clearance between pivot components. It’s one of those small parts that makes a huge difference in how your front end handles and lasts.

What You’re Getting

Precision-manufactured 0.10mm thickness for exact tolerance control
High-quality steel construction that maintains its dimensions under load
Direct replacement for Carraro axle pivot assemblies
Available in specific thickness to match your adjustment needs

Built for Real Farm Work

This shim works in the pivot points of Carraro front axles found on Ford New Holland tractors. These are serious 4WD machines that see everything from loader work to heavy fieldwork, and the front axle pivots take tremendous stress as they articulate over rough ground while transmitting power to the wheels.

Made to Last

Carraro builds their axles to handle punishment, and their shims are made from hardened steel that won’t compress or wear out of spec. The precise thickness is maintained even under the constant loading and unloading that happens during normal operation.

Installation Notes

Installing pivot shims requires disassembling the axle pivot assembly – not a job for the field. You’ll want to check clearances carefully and may need multiple shim thicknesses to get the adjustment right. Always replace seals and gaskets when you’re in there, and don’t forget to refill with the correct grade of gear oil.