Description

That rhythmic clicking from your PTO shaft that gets worse under load isn’t going away on its own. Worn U-joints are calling for help, and ignoring them leads to catastrophic failure that can damage implements or worse. This Weasler cross and bearing kit gives you everything needed to rebuild those worn universal joints and get your power transmission running smooth again.

What You’re Getting

Complete rebuild kit with cross, bearings, and snap rings ready to go
Precise 1.26-inch bearing cap diameter fits Walterscheid 2400 series yokes perfectly
3-inch overall length matches factory specifications for proper fit
External snap ring design means you can rebuild these joints with basic tools
Type 2 design with snap ring grooves machined into the yokes for secure assembly

Built for Real Farm Work

The Walterscheid 2400 series handles medium-duty applications on tractors running implements like rotary cutters, hay equipment, and mid-range tillage tools. These are the same size U-joints that came in your driveline from the factory, so you know they’re sized right for your power requirements and operating conditions.

Made to Last

Weasler doesn’t mess around when it comes to PTO components. This kit includes precisely machined crosses that maintain exact 90-degree angles between bearing journals, and the needle bearings are manufactured to tight tolerances for smooth rotation without the slop that causes accelerated wear.

Installation Notes

Mark your yoke positions before you start—proper phasing prevents vibration. Never reuse old snap rings as they lose tension and can pop out when you least expect it. If one U-joint is worn, rebuild them all since they wear at similar rates. After assembly, grease thoroughly and check for smooth operation through the full range of motion.