Slip Sleeve Yoke for 12 Series PTO Drivelines with 1-1/8 Inch Hex Bore

Description

When you’re hooking up a PTO driveline, getting the right fit between your implement and tractor shaft is critical for safe operation. This slip sleeve yoke is the telescoping piece that slides over your implement’s hex shaft, allowing the driveline to adjust for length changes while transferring power smoothly. This Series 1350 slip yoke is the critical connection point that allows the driveshaft to adjust for movement while transferring power without binding or breaking under load.

What You’re Getting

• Precise 1-1/8 inch hex bore that fits snugly on matching implement shafts
• 1-1/16 Inch / 27.00mm cross and bearing cap diameter for 12 series universal joints
• 5-1/4 inch center of bearing to end measurement for proper driveline spacing
• Weasler quality construction designed for agricultural duty cycles
• Slip design allows driveline length adjustment during operation

Built for Real Farm Work

This tubing is designed for the Series 12 and 14 PTO systems found on a wide range of tractors and implements. These are the workhorses you see pulling everything from rotary cutters and balers to spreaders and tillers. The 12 series size handles lighter to medium-duty applications, making it perfect for utility tractors and smaller implements that still need reliable power transfer.

Made to Last

Weasler doesn’t mess around – their yokes are forged tough and machined to tight tolerances. This tube weld yoke is built from quality steel that can handle the constant stress of PTO operation, from the shock loads of engaging implements to the vibration of field work. The bearing surfaces are precisely machined to work smoothly with 14 series universal joints.

Installation Notes

This slip yoke slides onto your implement’s 1-1/8 inch hex shaft—make sure your shaft matches exactly for proper fit and safety. Keep the slip yoke properly greased according to your system’s maintenance schedule—most need attention every 40-50 hours of operation. The telescoping action should be smooth but not loose, allowing the driveline to adjust as your tractor and implement move through different operating positions.