Description

Ever found yourself with a bigger implement than your tractor’s three-point hitch was set up for? That’s where these conversion bushings come in handy. When you’ve got Category 2 lower links but need to hook up a Category 3 implement, this 2-1/2 inch adapter bush bridges the gap without forcing you to swap out your entire lower link assembly.

What You’re Getting

Converts your Cat 2 lower links to handle Cat 3 implements without major modifications
Heavy-duty steel construction that won’t crack under the stress of heavy implements
2-1/2 inch length provides plenty of bearing surface to spread the load evenly
Hardened finish resists wear from constant pin movement and weather exposure
Smooth internal bore protects your lower link pins from scoring and damage

Built for Real Farm Work

This conversion bush is perfect when you’re running mid-size tractors that occasionally need to pull heavier Category 3 equipment. Whether you’re hooking up a larger disc harrow for spring tillage, a heavy-duty cultivator for stubble work, or a commercial box blade for road maintenance, this adapter lets you use equipment that would otherwise require bigger lower link hardware.

Made to Last

The hardened steel construction handles the punishment that comes with heavy implement work. The 2-1/2 inch length isn’t just for show—it distributes the load over a wider area of your lower link pin, preventing the stress concentrations that cause premature wear and dangerous looseness in shorter adapters.

Good to Know

You’ll want to use these in matched pairs on both lower links to keep your implement tracking straight. Make sure your tractor’s hydraulic capacity and lift ratings can handle the bigger implement you’re planning to run. A light coat of anti-seize compound makes future removal much easier, and always double-check that the bushings are fully seated before you put any weight on the hitch.