Description

When you need a bolt that won’t back out on its own but still need to access it later, a clip-head bolt is exactly what you’re after. The clipped head design gives you better clearance in tight spots while preventing the bolt from spinning when you’re trying to remove the nut. This 1/2-inch Grade 5 bolt handles heavy-duty applications where regular hardware store bolts just won’t cut it.

What You’re Getting

Grade 5 strength rating handles high-stress farm applications without stretching or breaking
Zinc coating provides excellent corrosion resistance for outdoor equipment use
Clipped head design prevents spinning and saves space in tight mounting situations
Standard UNC coarse threads work with common nuts and threaded holes
1-1/2 inch length is perfect for securing brackets, guards, and attachment points

Built for Real Farm Work

This bolt works great on implements, loaders, three-point attachments, and anywhere you need reliable fastening without a full hex head. The 1/2-inch diameter handles serious loads while the Grade 5 rating gives you confidence it won’t fail when you’re working hard. You’ll find this size commonly used on cultivators, planters, mowers, and loader attachments.

Made to Last

The zinc coating holds up against moisture, fertilizer spray, and general farm conditions better than plain steel. Grade 5 steel offers the sweet spot between strength and cost—stronger than Grade 2 hardware but less expensive than Grade 8 when you don’t need the absolute maximum strength.

Good to Know

The clipped head means you’ll need to hold the bolt steady with pliers or locking pliers while tightening the nut. Clean out any rust or debris from threaded holes before installation for the best fit. A little anti-seize compound on the threads makes removal easier down the road, especially if you’re working in corrosive conditions.