Description
When your implement’s input shaft starts wobbling or your PTO connection gets sloppy, you’re looking at worn yoke bearings that’ll eventually tear up your whole driveline if you don’t fix them. A clicking, popping PTO shaft isn’t going to fix itself, and ignoring worn U-joints is a recipe for catastrophic failure that can destroy implements, damage tractors, or worse. This Weasler 55 series implement yoke gets you back to smooth, solid power transfer so your equipment runs like it should.
What You’re Getting
- Heavy-duty 55 series construction that handles the punishment of daily farm work
- Precise 1-inch round bore that slides onto implement shafts without slop or binding
- 1-17/32 inch bearing caps with 4-5/16 inch overall length for robust U-joint support
- 5-5/8 inch center-to-end measurement that works with standard driveline geometry
- Stock bore design – no keyway needed for simple, reliable connection
Built for Real Farm Work
The 55 series size is common on larger row-crop tractors that handle serious acreage, whether you’re running a rotary cutter through overgrown pastures, powering a round baler during hay season, or operating equipment for livestock operations. This yoke connects your tractor’s power to implements that need the strength of a 55 series driveline, typically on machines in the higher horsepower range where reliability isn’t optional.
Made to Last
Weasler doesn’t mess around – their yokes are forged tough and machined to tight tolerances. The 1-inch bore is cut precisely so it slides on smooth but doesn’t slop around after a season of use, while the bearing surfaces are ground smooth and the cross assembly is built to handle the constant speed changes and angles that come with real field work.
Installation Notes
This is a direct replacement that slides right onto your implement’s 1-inch round input shaft – no keyway required. Secure it with the appropriate hardware (usually a bolt through the shaft) and make sure you’ve got the right series match with other driveline components. Check the 5-5/8 inch center-to-end measurement against your existing setup to ensure proper driveline length.
Reviews
There are no reviews yet.