3/8″ 1-Wire 46″ NPT Hydraulic Hose Assembly

Description

When you’re running hydraulic implements all day, you need hoses that’ll handle the pressure without letting you down. This 3/8″ single-wire hydraulic hose assembly gives you the flexibility and strength to power everything from small hydraulic cylinders to auxiliary functions, with NPT fittings that connect securely to most standard hydraulic components. At 46 inches long, it’s sized right for connecting remote valves to implements or bridging hydraulic connections where a standard hose just won’t reach.

What You’re Getting

• Single-wire reinforcement that handles medium-pressure hydraulic applications without the bulk of heavier hoses
• NPT threaded fittings that seal properly with standard hydraulic components – no hunting for adapters
• 46-inch length gives you the reach you need for most implement connections and valve setups
• Flexible construction that bends without kinking, even in cold weather when hoses get stiff
• Oil-resistant outer covering that stands up to hydraulic fluid, diesel fuel, and the usual farm chemicals

Built for Real Farm Work

This hose works great for connecting auxiliary hydraulic functions like log splitters, small hydraulic motors, or hydraulic cylinders on tillage equipment. The 3/8″ size handles flow rates that work well with most tractor remote valves, and the moderate pressure rating makes it perfect for implements that don’t need the heavy-duty capacity of larger hoses.

Made to Last

This hose is built to your exact specifications and delivered free of defects. The single-wire reinforcement provides good strength without making the hose too stiff to work with, and the rubber compound stays flexible through temperature changes that make cheaper hoses crack or get hard as a rock.

Installation Notes

The NPT fittings thread into standard hydraulic components – just remember to use proper thread sealant designed for hydraulic systems. Avoid tape that can contaminate the system, and don’t overtighten the fittings as that can crack the component you’re threading into. A little hydraulic fluid on the threads makes installation easier and helps prevent galling.