Description

When you’re rebuilding a PTO yoke or replacing worn components, you need every part to fit right and hold tight. This metric roll pin is what secures the cross and bearing assembly in your Walterscheid Series I and 2300 yoke, and when it’s worn or missing, your whole driveline operation is at risk. It’s a small part that does a big job – keeping your PTO system running smooth and safe.

What You’re Getting

Precision 10mm diameter for exact fit in Walterscheid yoke assemblies
65mm length provides proper engagement through the bearing cross
Spring steel construction that won’t break under load or vibration
Metric sizing matches original equipment specifications perfectly

Built for Real Farm Work

This roll pin fits Walterscheid Series I and 2300 PTO systems commonly found on mid-size tractors and implements. These are the workhorses you’ll find on hay equipment, tillers, rotary cutters, and other PTO-driven machines where reliable power transfer is critical. Whether you’re running a 40-horsepower utility tractor or something bigger, this pin keeps the universal joint assembly locked in place.

Made to Last

Roll pins take a beating from constant rotation, shock loads, and the vibration that comes with field work. This one’s made from quality spring steel that flexes just enough to stay in place but won’t snap under pressure. It’s built to handle the forces generated by modern PTO systems and the punishment of real agricultural use.

Installation Notes

Drive this pin in until it’s flush or slightly below the yoke surface – it shouldn’t stick out where it can catch on shields or clothing. Use a proper punch or drift pin for installation, not a hammer directly on the roll pin. If you’re rebuilding the whole yoke assembly, this is a good time to replace all pins even if they look okay – they’re cheap insurance against future breakdowns.