Description
When you’re running a disc harrow through heavy residue or rocky ground, that constant jarring puts stress on every bearing in the gang assembly. A worn or missing bearing spacer can let things shift around, causing premature bearing failure and uneven disc operation. This replacement spacer keeps everything properly aligned so your bearings last longer and your discs cut evenly.
What You’re Getting
- Precision-sized 2-inch outer diameter and 1.5-inch inner diameter for proper fit
- 1-inch width provides the right spacing for optimal bearing alignment
- Durable construction that won’t crush or wear under heavy field loads
- Direct replacement for worn spacers – no modifications needed
Built for Real Farm Work
This spacer works with John Deere disc harrows that have 1-1/4 inch square axles. Whether you’re breaking up corn stalks in the fall, working down soybean stubble, or preparing seedbeds in spring, this part helps keep your disc gangs running smooth and your field work on schedule.
Made to Last
Bearing spacers take a beating from the constant vibration and side loads that come with disc work. This one’s built to handle those forces without deforming or wearing thin, maintaining proper bearing clearances season after season.
Good to Know
When replacing bearing spacers, it’s a good time to check your bearings and seals while you’ve got things apart. Clean everything thoroughly before reassembly – old grease mixed with dirt acts like grinding paste. Make sure spacers are properly seated before tightening everything back down.
Reviews
There are no reviews yet.