Description

When your feed auger, conveyor, or grain handling equipment starts making noise, chances are it’s the pillow block bearings calling it quits. A worn-out bearing doesn’t just make racket—it can seize up and damage expensive shafts or shut down your operation right when you need it most. This 2-hole cast iron pillow block bearing is built to handle the constant loads and vibration that come with moving grain and feed.

What You’re Getting

Solid cast iron housing that mounts securely with two bolts and won’t crack under load
Greasable design lets you pump fresh grease in to keep things running smooth
Set screw locking system holds tight on 1-1/4 inch shafts without slipping
72mm housing series provides plenty of strength for agricultural applications
Wide inner race design handles both radial and axial loads from belt tension and side forces

Built for Real Farm Work

This bearing fits grain elevators, feed mixers, auger systems, and other farm equipment that use 1-1/4 inch round shafts. Whether you’re moving corn, soybeans, cattle feed, or handling material in dusty barn conditions, this bearing keeps your equipment running when the work needs to get done.

Made to Last

Cast iron construction stands up to the punishment of farm life better than stamped steel housings that can flex and crack. The greasable feature means you can keep fresh lubricant flowing to the bearing races, which is crucial in dusty environments where sealed bearings would eventually fail from contamination.

Installation Notes

Mount the housing first, then slide your shaft through and tighten the set screws evenly. A drop of thread locker on the set screws keeps them from backing out with vibration. Grease it up good during installation and hit it with a shot of grease every few months or whenever you’re doing routine maintenance.