Description

When you’ve got your engine apart for a rebuild or major repair, don’t overlook these critical thrust washers. They control crankshaft endplay—that back-and-forth movement that can destroy bearings and create expensive problems if it’s not kept in check. This complete kit gives you everything needed to properly set endplay in your 3.152 engine.

What You’re Getting

Complete set with 2 top and 2 bottom thrust washers—no guessing on which goes where
Standard thickness for proper crankshaft positioning and bearing life
Quality materials that handle the pressures and temperatures inside your engine
Precision sizing ensures proper oil clearances for reliable lubrication

Built for Proven Engines

These thrust washers fit the legendary Perkins 3.152 engines found in countless Massey Ferguson tractors from the 35 series all the way up through the 300 and 500 series models. You’ll also find these engines in Ford Dexta tractors and various Landini models. Whether it’s powering a compact utility tractor or a mid-sized field machine, the 3.152 has been a workhorse for decades.

Made to Last

Thrust washers take a beating—they handle all the forward and backward forces from the crankshaft while maintaining proper oil film thickness. These are built from materials that resist wear and maintain their dimensions even under the constant loading and unloading cycles your engine experiences during normal operation.

Installation Notes

These install between the center main bearing and crankshaft thrust surface. Check your service manual for proper endplay specifications—typically around 0.004 to 0.010 inches. Use a dial indicator to measure endplay after installation, and don’t forget to prime the oil system before startup. If you’re this deep into the engine, it’s smart to replace the main bearings while everything’s accessible.