Category 3 Lift Arm Drawbar for Large Frame Tractors

Description

When you’re hooking up implements to your big tractor, you need hardware that’s built to handle the workload. This Category 3 lift arm drawbar gives you a solid connection between your tractor’s lift arms and whatever you’re pulling—whether that’s a heavy disk, planter, or manure spreader. At 44 inches long with robust construction, it’s designed to take the stress out of heavy pulling jobs.

What You’re Getting

• High carbon steel construction that won’t bend or break under load
• Five adjustment holes let you dial in the perfect setup for different implements
• 1-1/4 inch holes and 1-7/16 inch pins handle Category 3 loads without worry
• 3-1/2 inch width and 1-3/4 inch thickness provide the strength your big tractor needs
• Direct replacement for worn or damaged drawbars on standard Category 3 tractors

Built for Real Farm Work

This drawbar is made for the larger tractors that do the heavy lifting on your farm—typically 75 horsepower and up. If you’re running a tractor with Category 3 three-point hitch, this drawbar gives you the pulling power for big implements like offset disks, heavy cultivators, large planters, and field finishers. The multiple holes let you adjust for different implement heights and angles.

Made to Last

High carbon steel isn’t just marketing talk—it means this drawbar can handle the shock loads and constant stress of field work without developing cracks or bending. The thick construction and quality materials ensure it’ll keep connecting your implements reliably, season after season, even when you’re pulling through tough ground conditions.

Good to Know

Installation is straightforward with standard Category 3 pins and hardware. Before installing, check that your lift arm spacing matches up properly—most Category 3 tractors are standardized, but it’s worth measuring twice. A light coat of grease on the pins makes future adjustments easier and prevents wear.