Description
When your hydraulic system starts acting sluggish or you’re hearing strange noises from the pump, dirty hydraulic oil is often the culprit. This critical hydraulic filter keeps your tractor’s hydraulic system running clean and efficient, protecting expensive pumps, valves, and cylinders from the contamination that causes costly breakdowns. Whether you’re running a loader, operating three-point implements, or powering hydraulic remotes, clean hydraulic oil is essential for reliable operation and maximum component life.
What You’re Getting
- 25 micron filtration that catches the particles that damage your system while maintaining proper flow
- Cross brand quality construction that’s built to handle the pressures and temperatures of farm work
- 200 PSI pressure rating with 15 PSI internal bypass to protect your system from damage
- Wide operating temperature range from -65 to +300 degrees F for year-round reliability
- F2 size design that fits standard hydraulic filter housings on many tractors and implements
Built for Real Farm Work
Modern tractors have hydraulic systems operating at pressures exceeding 3,000 PSI, and even microscopic contamination can cause catastrophic failures. A quality hydraulic filter removes metal particles from normal wear, dirt from external contamination, and degraded oil compounds that can damage sensitive components. This F2 element works in tractors, combines, balers, and other hydraulic equipment where clean oil makes the difference between smooth operation and expensive repairs.
Made to Last
Cross builds this filter element to handle the punishment that comes with farm work. The filtration media is designed to capture contaminants without restricting oil flow, and the construction handles pressure spikes and temperature swings that would knock out cheaper filters. Regular filter changes prevent the premature wear of expensive hydraulic pumps, control valves, and cylinders that can cost thousands to repair or replace.
Good to Know
Change this element along with your hydraulic oil according to your owner’s manual – typically every 500 hours or annually. If you’re doing heavy work like harvest or hay season, check it more often. Always use clean hydraulic oil when changing filters and inspect the old filter element for excessive metal particles or unusual debris. If the system has been contaminated, consider flushing and changing oil along with the filter.
Reviews
There are no reviews yet.