Description
That puddle of gear oil under your TE20’s steering box isn’t just messy – it’s slowly draining the lubrication your steering gears need to survive. When you’ve got oil seeping from under the steering box cover, it means the gasket has hardened and cracked, letting precious gear oil escape. This simple replacement gasket stops the leak at its source and prevents the expensive steering problems that come from running low on oil.
What You’re Getting
- Exact fit for TE20 series manual steering box cover applications
- Oil-resistant material that won’t deteriorate or swell in gear oil
- Proper thickness for correct seal without over-compression
- Die-cut design ensures perfect bolt hole alignment every time
- Direct replacement that fits right the first time
Built for Real Farm Work
These Ferguson TE20 tractors have been workhorses for decades, handling everything from brush hogging to hay work to general chores around the farm. The manual steering box relies on that gear oil to keep the gears smooth and protected. Whether you’re making tight turns around the barn or steering through rough ground, a properly sealed steering box makes all the difference in how the tractor handles.
Made to Last
This gasket uses materials specifically chosen to resist the gear oil used in steering boxes. Unlike generic rubber that swells and deteriorates, this maintains its shape and sealing properties for years. The thickness is precisely controlled to create the proper seal when the cover bolts are torqued to spec.
Installation Notes
You’ll need to drain the steering box and remove the cover to replace this gasket. Clean both sealing surfaces thoroughly – any old gasket material or debris will cause the new one to leak. Check the cover for warpage with a straight edge. Torque the cover bolts in a crossing pattern to avoid warping the cover, and refill with proper gear oil, not engine oil.
Reviews
There are no reviews yet.