Description
Nothing’s more frustrating than a worn nozzle boot that lets fuel drip all over your hands or makes the nozzle slip right out of the filler neck. This handy repair kit includes everything you need to replace that old, cracked boot and get your fuel transfer setup working like new again.
What You’re Getting
- Complete nozzle boot replacement that seals properly and grips tight
- Two mounting screws included so you don’t have to hunt around for hardware
- Direct replacement part that fits just like the original
- Quality materials that handle fuel contact and temperature swings
Built for Real Farm Work
This kit works on a wide range of Fill-rite small pumps including the 600, 1200, 2400, 4200, 4400, and 700 series units. Whether you’re running a portable pump for filling equipment in the field or have a tank-mounted setup at the shop, these are the pumps that keep smaller operations running smooth.
Made to Last
The boot is built from fuel-resistant material that stays flexible in cold weather and won’t crack under summer heat. The mounting screws are quality hardware that won’t strip out when you’re tightening them down, and they resist corrosion from fuel contact.
Good to Know
Installation is straightforward—remove the old boot, clean the mounting surface, and bolt on the new one with the included screws. If the old boot is really stuck, a little heat from a hair dryer makes removal easier. Check that your pump model matches before ordering, as different series use different boot designs.
Reviews
There are no reviews yet.