Description
When your lift arms start showing their age with worn-out ends or damaged attachment points, you don’t always need to replace the whole arm. This Category 2 weld-on end lets you fix what’s broken and get back to work without breaking the bank. It’s the kind of repair that makes sense on the farm—fix what you can, replace what you must.
What You’re Getting
- Forged steel construction that’s built to handle the stress of lifting heavy implements
- Category 2 sizing with 1-1/8 inch pin hole for proper implement attachment
- Straight design that welds on clean and maintains proper geometry
- 4-3/4 inch overall length with 2-3/4 inch width at the weld end for a solid connection
Built for Real Farm Work
This weld-on end works on general purpose tractors that use Category 2 three-point hitch systems. Whether you’re running a brush hog, disc, or cultivator, this end provides the reliable connection point between your tractor’s hydraulics and your implement. It’s designed to handle the lifting, lowering, and positioning that happens hundreds of times each season.
Made to Last
Farm equipment takes a beating, and lift arms are no exception. This forged steel end is heat-treated to resist wear while staying tough enough to handle the shock loads that come with working uneven ground or lifting heavy implements. The quality steel construction means it’ll hold up season after season.
Good to Know
You’ll need some welding skills or a trip to your local welding shop to install this properly. Clean off all the old metal and rust from your lift arm first, then position the new end and weld it solid all the way around. Take your time with the prep work—a clean weld joint makes all the difference in how long the repair lasts.
Reviews
There are no reviews yet.