Description
Nothing’s scarier than getting rear-ended by a pickup truck while you’re creeping down the road with your cultivator. When your brake lights don’t work, following traffic has no warning when you slow down or stop. This heavy-duty brake light switch makes sure your lights activate every single time you touch that brake pedal, keeping you and your equipment safe on those trips between fields.
What You’re Getting
- Works with both 12V and 24V electrical systems – no matter what your Deutz runs
- Built for 200,000 switching cycles so it’ll outlast several tractors
- IP67 rated means completely sealed against dust, water, and pressure washing
- Handles everything from -5°C winter cold to 80°C engine compartment heat
- Resists hydraulic fluid, diesel, fertilizer, and chemicals that kill regular switches
Built for Real Farm Work
Whether you’re running an Agroprima compact around the barnyard, using a DX4 for field work, or pulling heavy implements with a DX6 or DX7, this switch handles the daily grind. It’s designed for tractors that spend time on public roads – hauling grain to the elevator, moving implements between farms, or just heading to town for parts.
Made to Last
Farm switches take a beating from vibration, temperature swings, and chemical exposure. This one’s built different – completely sealed against moisture and dust, resistant to all the fluids your tractor encounters, and tough enough to keep working through years of daily use. The IP67 rating means you can pressure wash around it without worry.
Installation Notes
Most installations involve two wires and mounting at the brake pedal linkage. The 10mm switching path gives positive engagement so you know it’s working. Test your brake lights after installation and check them regularly during your pre-trip inspections – it’s cheap insurance against expensive accidents.
Reviews
There are no reviews yet.